All projects 2022 - 2024

USB Boot with HAB Signature Verification for Secure Embedded Linux

Confidential - energy/IoT device manufacturer

U-Boot USB Boot - HAB Signature Verified Recovery Boot from USB Stick

Challenge, Approach, Outcome

1

Challenge

A secure field device needs a service recovery path: boot signed images from a USB stick without weakening the HAB chain of trust.

2

Approach

Extending the U-Boot autoboot environment with a USB path: usb start, fatload of fitImage and device tree from a FAT stick, HAB signature verification of the fitImage before bootm - then booting the dm-verity-protected system, documented with boot logs and failure analysis.

3

Outcome

The spike is complete: HAB-authenticated USB boot was demonstrated on hardware (FIT hash verified, kernel 6.1 starts). Constraints documented: about 20 MiB/s USB read speed, required dm-verity env file, initramfs shell gap; testing on a closed device remains open.

Technologies Used

Project Description

Production devices of the secure energy field device disable USB and SDP access. For manufacturing and service, a recovery path was still needed: boot a signed system from a FAT USB stick - with the same HAB verification as a normal boot.

I extended the U-Boot environment (2024.01) with a USB boot path: usb start, fatload of fitImage and device tree from the stick, usb stop, then HAB authentication of the fitImage before bootm with the matching DTB configuration. If the signature check fails, nothing is booted.

The boot log proves the chain: FIT subimages are verified with sha256, kernel 6.1 starts, and the dm-verity initramfs takes over rootfs verification. Practical findings: slow USB sticks run into EHCI timeouts (about 20 MiB/s read speed required); the initramfs expects the .verity.env file on the stick; a getty workaround was documented for shell access inside the initramfs.

Open items at the end of the spike: a dedicated USB initramfs with shell, and testing on a device with burnt SRK fuses (closed state).

A similar challenge in your project?

Let's talk about how I can support your embedded team.

Get in Touch